Classes and Characteristics of Composite Materials

There is no universally accepted definition of a composite material. For the purpose of this work, we consider a composite to be a material consisting of two or more distinct phases, bonded together.1

Solid materials can be divided into four categories: polymers, metals, ceramics, and carbon, which we consider as a separate class because of its unique characteristics. We find both reinforcements and matrix materials in all four categories. This gives us the ability to create a limitless number of new material systems with unique properties that cannot be

obtained with any single monolithic material. Table 1 shows the types of material combinations now in use.

Composites are usually classified by the type of material used for the matrix. The four primary categories of composites are polymer matrix composites (PMCs), metal matrix composites (MMCs), ceramic matrix composites (CMCs), and carbon/carbon composites (CCCs). At this time, PMCs are the most widely used class of composites. However, there are important applications of the other types, which are indicative of their great potential in mechanical engineering applications.

Figure 1 shows the main types of reinforcements used in composite materials: aligned continuous fibers, discontinuous fibers, whiskers (elongated single crystals), particles, and numerous forms of fibrous architectures produced by textile technology, such as fabrics and braids. Increasingly, designers are using hybrid composites that combine different types of  reinforcements to achieve more efficiency and to reduce cost. A common way to represent fiber-reinforced composites is to show the fiber and matrix separated by a slash. For example, carbon fiber-reinforced epoxy is typically written ‘‘carbon/ epoxy,’’ or, ‘‘C/Ep.’’ We represent particle reinforcements by enclosing them in parentheses followed by ‘‘p’’; thus, silicon carbide (SiC) particle-reinforced aluminum appears as ‘‘(SiC)p/ Al.’’

Composites are strongly heterogeneous materials; that is, the properties of a composite vary considerably from point to point in the material, depending on which material phase the point is located in. Monolithic ceramics and metallic alloys are usually considered to be homogeneous materials, to a first approximation.

Many artificial composites, especially those reinforced with fibers, are anisotropic, which means their properties vary with direction (the properties of isotropic materials are the same in every direction). This is a characteristic they share with a widely used natural fibrous composite, wood. As for wood, when structures made from artificial fibrous composites are required to carry load in more than one direction, they are used in laminated form.

Many fiber-reinforced composites, especially PMCs, MMCs, and CCCs, do not display plastic behavior as metals do, which makes them more sensitive to stress concentrations. However, the absence of plastic deformation does not mean that composites are brittle materials like monolithic ceramics. The heterogeneous nature of composites results in complex failure mechanisms that impart toughness. Fiber-reinforced materials have been found to produce durable, reliable structural components in countless applications. The unique characteristics of composite materials, especially anisotropy, require the use of special design methods.

READ MORE.......

Carl Zweben

Devon, Pennsylvania

Mechanical Engineers’ Handbook: Materials and Mechanical Design, Volume 1, Third Edition.

Edited by Myer Kutz

Copyright  2006 by John Wiley & Sons, Inc.

for STEP BY STEP GUIDE solidwork simple tutorial please visit.........

www.solidworksimpletutorial.blogspot.com

---or---

www.solidwork-simple-tutorial.com

Berbagi :